The LT50 25nm is suitable for a wide range of application types including roller blinds roller shutters and awnings. Available in torques from 6Nm to 50Nm.
Comes with a 48mm design suitable for tube 50mm to 65mm.
* Parallel wiring of motors is prohibited without the use of an isolation controller, eg. 4AC Motor Controller,
4 Motor Group Controller, etc. Direct switching of a 230V motor must always be done via a mechanical interlock.
Support
roller shutter motor selection chart
external motor selection chart
Technical Information
DIMENSION |
|
|---|---|
| Length (L1) | 563 mm |
| Basic crown for tube diameter | 50 x 1,5 mm |
| Weight | 2.2 Kg |
| Overall length (L3) | 555 mm |
| Riveting position distance (L2) | 540 mm |
CABLE |
|
|---|---|
| Plug in cable | Black LT Plug |
| Cable type | PVC |
| Wire section | 0,75 mm² |
| Color | White |
| Wire Length | 2,5 m |
| Number of wires of the cable | 4 |
MECHANICAL
|
|
|---|---|
| Capacity of the limit switch unit | 46 turns |
| Type of limit switch unit | Quick limit switch |
| Type of head | Star |
| Nominal Speed | 17 rpm |
| Nominal Torque | 25 Nm |
| Repeatability | ± 5 ° |
ELECTRICAL
|
|
|---|---|
| Consumption during operation | 140 W |
| Minimum voltage | 207 V |
| Maximum Voltage | 244 V |
| Rated current | 0.65 A |
| Nominal Voltage / Frequency |
230VAC - 50Hz |